Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,
I'm busy configuring a new nexus 1000V environment that have to work on ESXI 6.5
The issue is that I cannot establish the svs connection between the VSM and the VCenter Server 6.5
I'm receiving the following error while trying to estab...
Hello all,
We recently upgraded our Nexus1000V ( for VMware) from v4.2.1.SV2.2.2 to version 5.2(1)SV3(3.1) and since then, when executing a remote span to my machine, the traffic never arrives at destination anymore.
The configuration looks to be c...
Hello,I need to monitor my Nexus 7004 and 7010 by my SNMP Agent, but I can't find the way to donload the required MIBs.For information I'm running the folling images:bootflash:///n7000-s2-dk9.6.2.6b.binbootflash:///n7000-s1-dk9.6.1.5.binBy advance th...
Hi all,Could someone tell me what is the upgrade path from Nexus OS release 6.0.1 to 6.2.8 with a N7K10 Single supervisor chassis ?If I don't mistake :1) from 6.0.1 to 6.0.42) from 6.0.4 to 6.2.(2a)3) from 6.2.(2a) to 6.2.(8) Could you confirm this u...
Hello All, We are using ACE 4710 appliance to load-balance our webserver.I saw in https://www.cisco.com/c/en/us/products/collateral/application-networking-services/ace-4700-series-application-control-engine-appliances/eol_C51-728976.html that the har...
Hello Kirk,Please find attached the result of all the show command. (see debugLogs.txt)If you already see errors from the provided info, please let me know.
vmkping to the destination ip is well successful :
# vmkping 10.21.51.1PING 10.21.51.1 (10.2...
Hello Mohamad, Thanks for your answer but the goal of my question was more to know how to upgrade from 6.0.1 to 6.2.8. Should I go directly to 6.2.8 or should I follow the upgrade path previously mentioned :1) from 6.0.1 to 6.0.42) from 6.0.4 to 6.2...
Hi Antonios,Thanks a lot for your reply that should help me to configure the offloading of the SSL and apply the stickyness.I come back to you if I have other question related to the SSL termination ( not experienced yet).Many thanks.Frederic
The client 1 is not the cause of the issue because I have one other client on the blade switch in thisvlan and every client is impacted with the issue.Ping between client within the vlan is OK.The mac address of the gateway is well known on the switc...
