About nickgreen

nickgreen · 02-03-2014

Hi all, I'm trying to find some information relating to the over-subscription on the 8-port 10Gbps modules (e.g. WS-X4908-10GE) that are available for the 4900M. I've found that they have a 2:1 ratio, but cannot find out whether this is mapped port-t...

nickgreen · 06-07-2011

Hello, hopefully someone will have the answer to this little puzzle I have. For security and support reasons it would be favourable to have remote routers boot and load a config from the flash card. It seems this is possible if the Flash Class is A, ...

nickgreen · 01-20-2009

Hello, I'm looking to harden the security of a MeetingPlace Express (V2.0.1.15).SSL has been implemented successfully resulting in https browsing only. The next step is to integrate with AD for user authentication over a secure link. The Bind request...

nickgreen · 12-24-2008

Hello, I am trying to configure a C1800 router so that we can replicate our live system in a development environment. Live system has satellite links between sites interfacing to site routers using FE interfaces. Our DEV SAT SIM has only Serial inter...

nickgreen · 05-27-2008

Hello All, I have a complex design using IPSec tunnels to connect remote users. The IPSec tunnels to the devices work, however occasionally they drop. When the IPSec tunnels drop I seem to be getting the follow error being logged with ISAKMP and IPSe...

nickgreen · 02-03-2014

Thanks Steve for the speedy response. I don't have a module installed in a chassis available at present so can't check this command but at least I've a starting point for port usage.

nickgreen · 06-07-2011

ROM : Version 12.4(13r)TIOS : Advanced IP Services K9, V12.4(10)b.Updating IOS and or ROM versions is unlikely to be possible in the short term due to the volumes of devices installed.The Flash information came from http://www.cisco.com/en/US/docs/i...

nickgreen · 01-05-2009

Thanks Guiseppe,That sorted it, I think the time of year was effecting my brain!

nickgreen · 06-02-2008

Thank you for the response, however it doesn't really help as when I go into the bug toolkit I receive the following message :CSCeg44021 has been superseded by CSCeb03160 displayed below. CSCeb03160 Bug Details Information contained within bug ID CSC...

nickgreen · 06-07-2006

Thank you both for the replies. The link we have would be of the order of 12 meters, so we are within this distance but getting into the area (I suspect) where errors could become evident. This raises another question, if the Cisco cable's suitablili...

Member Since	‎10-03-2005 01:57 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	12

User Statistics

User Activity

4900M 8-port modules.

loading a configuration from a Flash card in a 2811 router.

Securing LDAP on Meetingplace Express

Route or Bridge?? Can this be done?

IPSEC error message, what does this mean??

4900M 8-port modules.

loading a configuration from a Flash card in a 2811 router.

Re: Route or Bridge?? Can this be done?

Re: IPSEC error message, what does this mean??

Re: X21 Maximum distance @ 2Mbps