Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
a quick help, what config must i add to my 1700series router. i want to be able to ping my lan interface from remote router, the wan interface is reachable from the remote, am a novice, tho familiar with cisco commands
My border router which is in the LAN, of late has started giving erratic ping(1000ms) and timeout yet it is just in the LAN after a reset it come to normal (ping response becomes an average 5ms)but when the traffic goes thro it ping response degrades...
The network is a private WAN there is a default static route to the gateway in my case the satellite modem.Fastethernet port connected to modem 172.32.1.5 the ethernet port connects to my LAN 172.31.1.5. from remote am reaching the wan port...there i...
Thanks i will try netflow tho i have never configured it, give me time i try my hands on a demo router then on the BR because its critical each reset causes an uproar. The issue happens depending on traffic flow. The higher the traffic the faster it ...
Thanks John but i have all kinds of traffic( from clients) flowing thro the router i just need to pin which IP, AL, or config is causing the mess.From the records the issue happens like thrice in a day each time i do a reset things are normal.
Thanks medan for the lead for sure when the ping become erratic the cpu utilization is around 98-100% which it has never attained before.The processes which takes most of the CPU time is IP Input, and TurboACL.I have this article http://www.cisco.com...
