Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have never tried this before. I TFTP the ASA's config to my TFTP server via the ASDM - File > Save running config to TFTP server.How do I restore this back to the ASA should I need to. Normally I don't save to flash and if there is an issue I ...
Hello,I have a Cisco ASA and a 3750. We have a 50mb lease line and are getting nearly the 50mb download speed, but only 10mb upload speeds.As per the attached diag.jpeg we have (among others) 2 VLAN's, one for the inside of the ASA (LAN) and one for...
Hi,I've not had any luck with this. I have an ASA with a sub-interface to a switch and from the switch I have a VLAN where a router sits to our remote office. It is not a VPN just a lease line via serial.My LAN is on 192.168.3.0/24 and the remote n...
Hi,Do I need to buy/create an SSL cert to use the anyconnect SSL VPN option?I went the the wizard on the ASA and got it working but how do I know if a cert is being used or where the ASA has created one etc?Thanks
Hi,I have a Pix515 with a WAN link to a remote office. The Pix has an ethernet port that plugs into a 3550 switch which is set a s a trunk. The WAN router is plugged into VLAN 7 (subinterface).My LAN is on 192.168.3.x/24 and I need to have the tran...
I think I have to do a bit more, the subnet is now advertised to te remote router.If I ping (from 192.168.3.20) 10.100.0.61 and on the router I have debug ip icmp I sees the traffic source as 192.168.3.x not 192.168.90.x.Do I have to add ACL's to the...
husycisco,I will attempt creting a new sub-interface for the 192.168.90.c network, is this all I have to do as you say "You dont need any nat configs cable connection etc."I understand I just need to add it to rip? and add your NAT statement?
Damn, I must be missing something. Thanks for finding the time to help me, once fixed I will definately rate this.I have added what you mentioned and still no luck, I have attached the 2 updated configs for the firewall and remote router plus a simp...
