Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
It seems to me that there would be a larger need for IOx based network nodes that ran on non rugged enterprise environment, like the 3560, 3850, etc. I find that there would be a large use case for creating apps living in these environments where the...
Is there any other devices on the same vlan when you move the device to the other switch? The reason that I ask is that the vlan will not come online until you have a device on that vlan. This might be the reason of why you have a delay in the device...
This should't matter, but do you have Ip arp inspection enabled? As a precaution I would add " Ip arp inspection trust" and "ip dhcp snooping" trust on a port on each switch and see if the problem continues. This will rule out any inspection issue, a...
Hi I recommend you first inventory how many and where the access points will go. It is pretty safe to have a seperate vlan just for AP management. This is good for several reasons, one you can create DHCP vendor options so that your AP's can automati...
Yes mobility anchoring is the way to go, so to do this, the anchor wlc would have the SSID interface set to the local network vlan (this network is where all traffic will terminate) the other WLC will have the same SSID with its interface set to the ...
Just curious, does your workstations have windows NLA (Network Location Awareness) enabled? I had a bizarre issue once where NLA was turning on because it thought it was on a public network, and was enabling firewall, and taking a long time to authen...