Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a windows 2003 PPTP server working well in my LAN, users from the LAN are able to connect to the PPTP server using windows PPTP client. My access router is a cisco 1710 router (IOS version 12.3) with NAT enabled, I configured PAT on port 1723 ...
Hello,I have a cisco 2600 router with IOS version 12.3 (see below the ourput of show version).I have two connections to the internet, the first one behing which I am doing NAT overload, and the second for my servers to be seing over Internet.I am try...
I have a windows 2000 PPTP server working well in my LAN, users from the LAN are able to connect to the PPTP server using windows PPTP client. My access router is a cisco 2600 router with NAT enabled, I configured PAT on port 1723 so that users from ...
Hello,I tried what you said, but my IOS version doesn't allow me to write access-list with GRE protocol in port based, with destination on the interface :here is what I enter in my router :ip nat inside source access-list 101 interface ethernet0 acce...
Hello,I configure as you said, but it did not work.Look below the option of the command:(config)#ip nat inside source static ? A.B.C.D Inside local IP address esp IPSec-ESP (Tunnel mode) support network Subnet translation tcp Transmis...
