About GlennStile

GlennStile · 03-05-2013

Hello All, Bit of a problem, quite a large one really.. I have been configuring a RV082 and during setup I set the DMZ private IP address(Setup > DMZ host) to one of our internel servers for testing.I have tried to disable it today by entering 0.0.0....

GlennStile · 03-02-2013

Evening all, I'm having a real headache getting our asterisk based pbx to work correctly behind out new RV082. If i have just one Wan connection up its fine but as soon as it is set in load balancing mode both connections up I get one way audio.I've...

GlennStile · 03-03-2013

Great , I'll leave as is for now then, Were using the G729 codec for the main external trunk which runs at 8kbit/s per call, I'm waiting for the wan2 ADSL interface to be changed to Annex M which should give plenty of bandwidth.fingers crossed for mo...

GlennStile · 03-03-2013

Cheers Tom , Looks to be working well now, One last thing...with regards to QOS for Voip is there any best pratice documentation for these routers? I'm currently using 'Priority' based 'Upstream' for the Voip services and its working ok but traffic ...

GlennStile · 03-03-2013

Thanks Tom,That is the last method I had tried and was having some success (does this look correct)however even with these settings I was still getting traffic from 1.65 on ppp1 (not just DNS querys), I'll go and bind the phones, hopefully that will ...

Member Since	‎03-02-2013 10:59 AM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	5

User Statistics

User Activity

RV082 Disabling DMZ

RV082 Asterisk PBX

Re: RV082 Asterisk PBX

Re: RV082 Asterisk PBX

Re: RV082 Asterisk PBX