Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear AllI have topo as belowR1(gi0/1)<------------->(gi1/0/1)SWH01(gi1/0/2)<---------SDH Network--------------->(gi1/0/1)SWH02Configuration-------R1interface GigabitEthernet0/1.121 encapsulation dot1Q 121 ip address 192.168.1.1 255.255.255.252-------...
Dear AllMy topology is below CE(ADSL modem)----IP DSLAM----SWH01(C3750)-----R1(7206)(POS1/0)<----------MPLS Core---------->(POS1/0)R2(7206)----SHW02(C3750)-------BRASI already config routing and MPLS,it's work well. Now I want to implement L2VPN for ...
Dear AllI have an issue with cisco 7609. You can refer the topolog belowPCs-------->Router(7609)------------------------->ISP A ------------------------->ISP BMy router have connected to two Uptream Provider(ISP...
Dear AllMy topology below:R1(gi1/1)------------------EoSDH----------------------------(gi1/2)R2gi1/1 MAC: aaaa.bbbb.ccccgi1/2 MAC: dddd.eeee.ffffI have an issue,the R1 connect to R2 directly over SDH network. I already configured IP address both side...
Dear AllMy switch is running very well but suddendly it crashed and I cant ping the switch anyway. When I use console to login to the switch. It appears alot of log messages (flushing message log) and It repeats log message and nonstop, it's same as ...
Dear All,Please kindly advise how to use "remote command switch test mls cef tcam-shadow off" for this case. I go command on router but there're not any test option. The below for your referenceremote command switch ? LINE Remote command stringBest...
Dear All,I have the same problem with C2921. I want to config IP SLA for my C2921 but it seems do not support. The below for your reference.####### Do not have option monitorip sla ? key-chain Use MD5 Authentication for IP SLAs Control Messages r...
Hi PaoloThanks for your responding. I also show ip route firstly, Router still right but PC go the wrong wayI also try to use the below commands, but it did not resolved the issueclear ip routeclear ip cacheAny advises about this issue without Ugrade...
Dear AmitThanks for your respondingI can't try revert to the old config because it will affect to our customer. The switch SWH01 be on the our customer side. You can refer the show version below on SWH02show version Cisco IOS Software, C3750 Software...
