About bharathid

bharathid · 03-03-2013

Hi experts,I am seeing Native VLAN mismatch errors on my 6506 switches as belowSW1.Mar 4 02:06:37 UTC: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet2/19 (981), with SW1 GigabitEthernet5/1 (1).SW24y2w: %CDP-4-NATIVE_...

bharathid · 09-06-2018

Hi Mahabir, while searching solution for the same type of issue in my environment with N5K VPC, I see the bridge Assurance block kicked in our vpc-peer-link due to peer hardware failure but at the same time we lost the redundancy. could you please ...

bharathid · 03-03-2013

Hi Leo,sorry for the confusion,I have 2 switches (sw2,sw3) connected to Sw1. I am getting VLAN Mismatch error on SW-1 for both sw2 and sw3This is SW1 log.Mar 4 05:27:38 UTC: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEth...

bharathid · 03-03-2013

Hi sharieff,You can see the above configs on the interfaces and portchannels are same, there is no chabge in native vlan no.

bharathid · 03-03-2013

Hi leolaohoo,The native vlan mismatch b/w the ports are G2/19 on SW1 and G1/5 on Sw2Here is the configSW1#sh run int g2/19Building configuration...Current configuration : 306 bytes!interface GigabitEthernet2/19 switchport switchport trunk encapsulat...

Member Since	‎11-12-2007 05:55 AM
Date Last Visited	‎09-25-2018 06:26 AM
Posts	8

User Statistics

User Activity

VLAN Mismatch error eventhough same config

Re: Hi John

VLAN Mismatch error eventhough same config

VLAN Mismatch error eventhough same config

VLAN Mismatch error eventhough same config