If you are referring to the IPVC product family then the answer is that it currently only support unicast transmissions. If you conference is set to be 384K then each user would get that back to them as a unicast transmission back from the MCU that ...
Basically no this is not possible. In order to use the "Confrn" feature button on the IP Phone to initiate a videotelephony conference between multiple devices the 3511 MCU needs to be in SCCP mode. This will allow the MCU to register with and be c...
One point of clarification in regards to what has been stated here. While it is possible to have both IP Communicator and VT Advantage co-resident on a system, they will not interact with one another making IP Communicator video capable at this time...
Only one IPVC MCU may be associated to a MeetingPlace system through the video integration. You can find out more information through the link below.Administrator's Guide for Cisco MeetingPlace Video Integration Release 5.3:http://www.cisco.com/en/U...