Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi GillesAre there any restrictions with respect to the packet size to which the CSS understands or responds to? When I ping with a packet size up to 65000 bytes the CSS does not respond however it does respond to 32000.Thank youRegardsSanjith
Hi GillesCould you please help with the following?If I have defined 2 VIP addresses and each of the VIP address has the same set of real servers then will there be a problem. This is specific to DNS servers.Your help would be of great helpThank youRe...
HiIf I have a set up in which we have a content engine used as a reverse proxy server and I have the web servers in a DMZ and the CE connected directly to the router then what is the IP address for the CE. Do I give it a private IP address and have i...
Hi Incase I have all the users coming in through a proxy server then I would have only one Source IP address. Is there a possibility of load sharing based on the users and have sticky session enabled based on the user who initiated the connectionThan...
Hi GillesIf I NAT the private IP addresses of my backend servers to a public IP address for the servers to access the internet. Can I use the same VIP address for the clients on the internet to access the servers? I suppose that this is possible. Cou...
Thank you so much for your response.With respect to only the server initiating connections to the internet will the following work.service ftpip address X.X.X.Xprotocol tcp keepalive type tcp keepalive port 21 port 21 keepalive frequency 255 active o...
Thanks GillesSo this means that I may use the VIP address for the clients to contact the servers and also for the servers to initiate a connection to the internet. However the Natting will be done port based. So I understand that I may just add the V...
Thanks for the reply.With the router when I load balance between 2 ISP's and require failover as well, I need BGP. However incase I use the CSS can I do it with out using BGP. Although it is not recommended it should be possible right? Also it should...
Thank you so muchJust one last question.As per what I have understood untill now the load balancing can happen at L3/L4/L5/L7. Hence I really dont have to worry if the customer is using some fancy application as long as I know what port number the ap...
Thank you for the response.At the application level the CSS can load balance http traffic. Similarly are there any other applications it can load balance.Also can I load balance between mail servers. Incase yes then how can I do itThanks againRegards...
