About mgalla3327

mgalla3327 · 01-13-2012

Hello everyone,Currently I have about 200 Cisco switches on my network of various models.Does anyone know of an easy way to backup the startup-configs and Vlan.dat files otherthan logging into to each switch and using tftp?

mgalla3327 · 08-13-2010

Hello everyone,I have a question on Vlans for you...I recently added a vlan to a Cisco 3524xl (SW1) which is connected to a 3508. I configured trunking on SW1 on G0/1 and added the "switchport access vlan 22" statement to the rest of the ports excep...

mgalla3327 · 07-22-2010

Hello everyone,I have a 3550 < IPBASEK9-M > running version 12.2<40>SE software.There is a VTP domain name setup on the switch.I am using the Transparant mode on the switch.I also have created an extended vlan.How do I remove the VTP domain name. I ...

mgalla3327 · 12-01-2009

Hello everyone,I am trying to study for the CCNA test and I'm working with 2 switches trying to configure vtp.The first switch seems to be ok but the second switch when I go into config mode the only option undervtp is file. How do I get to the othe...

mgalla3327 · 06-10-2009

Hello everyone,I have a number of switches on the network that are linked on the G0/1 port with a CX_GIGASTACK module. I have numerous stacks throughout the network.Some appear to be connecting at the following...Auto-duplex (Full), 1000Mb/s, media ...

mgalla3327 · 08-16-2010

So I would have to Add Vlan 22 to the switch,and add all ports to that Vlan.I do have an IP address on the switch on Vlan 1.Will I also need to remove the IP from Vlan1 andadd it to Vlan 22 to still be able to manage the switch?Thanks for your help,M...

mgalla3327 · 12-01-2009

Jon,Thank you for the help, you were right on!Is it the IOS version causing me to have to go into vlan database to get to the commands?Just curious...Thanks again...

mgalla3327 · 03-03-2009

No Kevin. If I hard code both ends at 100 it still disconnects. Here's how it works so far...Nic 10FD - Switch AutoNic 10FD - Switch 10FD speed 10

mgalla3327 · 03-03-2009

Yes.That is the version currently on the switches. Thanks for the input. Please let me know if you come up with anything else.

mgalla3327 · 03-03-2009

What we're doing is rolling out new HP PCs. When we put back the original pc all is well. When we add a nic card to the pc all is well. We have several hundred of these to replace and so far we've tested around 5-10 and they are all giving the sam...

Member Since	‎11-12-2006 04:58 PM
Date Last Visited	‎03-19-2021 12:01 AM
Posts	29

User Statistics

User Activity

Streamline switch backups

Native Vlan Error

Removing VTP domain name???

Can't configure VTP

Collisions on WS-C3524-XL-EN

Re: Native Vlan Error

Re: Can't configure VTP

Re: Model number: WS-C3524-XL-EN

Re: Model number: WS-C3524-XL-EN

Re: Model number: WS-C3524-XL-EN