@a.hajhamadHiI suspect something mis-configured in the object setup.Below reference will assist you in identifying the issue.http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800d641d.shtml#nethttp://www.cisco.com/en/US/...
HiI am guessing here as you haven't uploaded the current configuration, please check Crypto lifetime configurations. That might be the reason behind it disconnect.Below link might help you to identify other time variables that are part of a tunnel co...
Hi Tim,From the looks of thing you want to setup, I recon having the router in front of the ASA is the best way. But for that setup to work you need to move the IPSec Site-to-Site VPN setup to routers and use the ASAs to do firewalling.On each site r...
Hi Tim,If you can provide me with a network diagram including how the VPN traffic is tunneled through the two ISPs that can help to answer you questions properly.Meantime, Yes any router can do PBR. it is a feature of the IP Base image (default lowes...
Hi Danny,You wildcard mask in the network statement is incorrect from the looks of things.network 10.82.253.81 0.0.0.0 area 0 --> basically gives you exact IP address match onlyBelow will give you a /24 network matchnetwork 10.82.253.81 0.0.0.255 are...