Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, i have this scenario: 1 WLC 2100 and two LW AP 3500 connected. If the access points are connected via external switch evrything works well - AP and Clients get IP address from external DHCP and this is ok but when im connecting AP 3500 directly...
Hi, im using now succesfully VoIP phones SPA 921/922/941/942 and this works well. I build custom dialplan with #4xx number that is command for my pbx software. Now i buyed few 502g and when im trying to call number #4xx with the same dial plan i ...
Hello, i have this scenario:Telco operator -E1-> Cisco AS5350 -E1-> Office PBXon cisco i have Radius Call Accounting and small problem - incomung and outgoing calls are recorded twice - one on firest e1 and second on second e1.How to disable accoun...
ISP will know this scenario i thing.On the ISP side you address ip from /30 address space (separate from /27) and on ethernet you address your address space /27and you need to add only one route - default to the ISP as i posted before, nothing more. ...
No there is not needed.This two subnets will be directly connected to your router so will be self routerd, one route as you need add is defult route to your isp:ip route 0.0.0.0 0.0.0.0 isp_wan_ip
In my opinion the best thing is that your ISP give you two address blocks - one /30 (for point to your router) and second for tenants (/27)You should have this:ISP (66.66.66.1/30) ---- (66.66.66.2/30) CISCO and on this side all subnet (66.66.67.1/27)...
Missunderstanding from you. i dont use. There is a bug in DHCP PROXY mode - WLC gives as gateway WLC management ip rather than GATEWAY IP associated from external DHCP.
Many thanks for your help. I will monitor port and well see if there is LOCAL HREAP needed.Assigning WLC management ip as getaway is bug on dhcp proxy on internal ports - yes?
