Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco Router 2921 configure by ISP and pass traffic to my Cisco ASA 5510 how can I configure the ASA 5510 to accept the traffic for my LAN usage.
Thanks in advance for response.
Hi John,
What i want to do is to port forward port 83 to server ip address 192.168.1.25 on the LAN. The inside ip of ASA is 192.168.1.21 and the outside ip of the ASA is 10.*.*.2 both on subnet 255.255.255.0. The server ip is NAT to 10.253.1.2.
Reg...
Hi John
Thank you for the response
I want to use NAT below is the version of the ASA
Cisco Adaptive Security Appliance Software Version 8.2(5)
What code can i use for the NAT
Regards
Ladipo
Hi John,
Thank you for your response.
How is the 2921 passing traffic to the asa?
Answer: This has not been done yet. I want to know how it can be done using CLI
are you using a routing protocol or static routes?
Answer: i am using static routes
ar...
