Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 20/20 MB circuit and an ASA 5510 and I am able to setup policing were the interace gets 512k down and 128k up so when I conduct a speed test with one user I get 512k and 128k and when I conduct a speed test with two users each gets 256k and ...
I have 90 1130A/G autonomous AP site. I want to deploy a 5508 controller, convert all APs to lightweight, and do it all remotely. I have full access to all the APs and can build the controller in any way to support this. Anyone have any ideas or w...
I have never seen a pause input on any of my Cisco devices. I am working with a new third party hardware and I am seeing these occur. Anyone know what pause inputs mean or how Cisco defines them. I can't find anything related to them online.Thanks...
Thanks for you help thus far,
I can't seem to make this work. I am on 5.3.3 code on a 9001. gps-port-dump shows nothing and show freq sync clock-interfaces never shows
RTR#show freq sync clock-interfacesFri May 27 13:11:24.699 ESTNode 0/RSP0/CPU0...
So I see this in my logging. Do I really need another license in order to do this?
RP/0/RSP0/CPU0:May 26 06:37:29.198 : license_agt[361]: %LICENSE-ASR9K_LICENSE-2-MOBILE_NEEDED : Timing feature is configured without a valid license / license config...
Thanks for the feedback, I have two more questions
1.) Can I only hook up the TOD as the time source to an ASR 9001 assuming I use the latest code 5.3.3.MD? Would this give me enough to replace using public NIST servers as my time source or do I h...
Xander, this is a great discussion. My issue is that I keep losing NTP sources on my ASR for various reasons. I see plenty NTP server boxes on the internet that use RS422, 10MHz and 1PPS. If you had to pick one which would you pick and how would y...
