Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have cisco WLC (AIR-WLC4402-12-K9) with two LAP (AIR-LAP1131AG-A-K9) connected to switch and one of the LAP is able to register with WLC while other one was standalone AP which has been converted to LAP which is unable to register with WLC. ...
Hi All,I have cisco WLC (AIR-WLC4402-12-K9) with two LAP (AIR-LAP1131AG-A-K9) connected to switch and one of the LAP is able to register with WLC while other one was standalone AP which has been converted to LAP which is unable to register with WLC. ...
Hi All,I have below CME setup and i am able to call from Analog phone connected to FXS port to all PSTN numbers but unable to receive call from PSTN on to the analog phone connected to FXS port. I can see the PSTN call is hitting my FXO port but cann...
Hi All,With reference to below mentioned diagram, i have configured channel group on e1 controller and trying to pass data on this link and works fine. So my question over here is for such kind of requests is service provider does one to one maping o...
Hi All,I have a lab setup of two 2821 routers connected back to back using E1 pri links and want to send Data on this link. In order to achieve this task i have configured channel groups on controller interface, assigned ip address and routing and th...
Hi,I have 2 AP's of the same model and one is working perfectly fine and other is not. in that case can i conclude that the issue is not with switch and we dont need to check for the cable?
