Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, When attaching to a leaf or spine from my APIC, I end up getting the prompt:admin@leaf1:~>shouldnt I (or how do I) get the logon:admin@leaf1# My command options are severely limited without the # prompt. This is in dCloud and ACI Sim. Is it that ...
Here is an official Cisco document on integrating VXRail and ACI.
https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/220691-configure-dell-vxrail-and-aci-vmm-integr.html
IMO, if you arent using VMM integration then you're really losing a lot. Here is an official Cisco document on integrating VXRail and ACI. If you have VCF there is an official guide on the ACI documentation portal, too.
https://www.cisco.com/c/en/us/...
Ran into this recently.
During the VxRail build (initial or node addition) there is a lot of IPv6 multicast communication within the VLAN 3939 ("VxRail Management"). I found that disabling Rogue Endpoint Control in ACI allowed this process to finis...
Hi.
Im going to agree with what others on here have posted that it’s probably your local machine vs APIC. What I would do is uninstall python on your workstation. Go to the directory python was installed at and delete any files within it.
Then in...
My first thought would be to do a format of the SD Card. Yes, you shouldn't need to for your hardware situation but stuff happens. You should be able to do this in UCSM (first choice), or you can do it via the ESXi installer recovery console.
This ...
