Hello,I've got a UCS Mini Chassis with 5 blades to play around with to learn with - Each of the blades has 2x 600G disks in them & an SD card.Is it possible with to install ESXi on the SD card and then use the local disks in a mirrored configuration ...
Hello, I have looked at various guides and can't seem to find any guides that fits (or even that I can change to suit my needs) what I require from ISE. I know ISE is very flexible but I am still struggling to see if it is possible... I have a requir...
So I managed to get this working, although I decided to scrap the idea of using the SD cards.In the end I removed any of the RAID configuration through the BIOS so the disks were left as 'Unconfigured Good'. Attached a new storage profile with a coup...
Hi there,It's the Cisco provided ESXi image for the hardware so I'd have to assume yes is the answer to that. Never occurred to me actually that could be the reason. I've been so wrapped up in my service profiles and who knows what else thinking that...
@Surendra wrote:I am assuming that you have a certificate issued for the machine and your requirement is to check this certificate along with the credentials provided by the user.Based on the assumption above, with the Windows Native Supplicant, you ...
Hi, Thanks for the reply. If I disable PEAP / MSCHAP in Allowed Protocols, will that still allow me to provide an AD username & password, as well as the cert for authentication? Thanks!
