Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are in the process right now of piloting users using Hughes DirecWAY and are having intermittent problems with the users being able to connect to the PIX. Sometimes it connects just fine but other times it won't connect at all, but the user's int...
I am trying to setup static default route for internet access. Router A has an fa0/0 interface (10.0.0.6) and a serial interface (10.0.3.202). We have a Pix, 10.0.0.1 which handles all of our internet access. So I have a static route (ip route 0.0...
We are in the process of developing a solution to utilize BGP to connect to multiple ISPs. We are at the stage were we are trying to select which router we want to use in a HSRP pair. We will have a maximum of 6MB (4 T1s) to the internet today and ...
We are starting to use ACS 3.0/NT for our router logins. We have two boxes and have successfully set them up for replication. I can get the tacacs+ logins to work as long as the first server in the 'tacacs-server host ..." list is available. If I ...
This will not work because it will just send the traffic out the e0 interface but won't know where to go from there, ie it doesn't know how to get to the pix...
I made the changes you suggested...When i pulled the plug on the Pix the traffic did not reroute to the serial interface, 10.0.3.202. From what I can see the reason being is that the 10.0.0.6 router still had the 10.0.0.1 as the default route in its...
This didn't work... In the router when i type 'sh ip route 0.0.0.0' is shows:RTRSAN01MX#sh ip route 0.0.0.0Routing entry for 0.0.0.0/0, supernet Known via "static", distance 1, metric 0, candidate default path Redistributing via eigrp xxx Advertis...
Answers to your Questions:We have approx 30 routers on our network, 26 connect to the internet via Pix B and the other 4 (Router B and the 3 routers connecting to the s0/0 sub-interfaces .10, .11, .12)You can see from the topology below that the outs...
I saw this error when setting up replication for our ACS servers. The problem is how you set up the Replication Partners in the Database replication settings.IE If your primary is 'Server1' and your secondardy 'Server2"In server1 you should first ma...
