Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently have 2 cisco PIX 520 in a failover arrangement. We have been asked to implement an additional layer of PIX firewall behind our current arrangement. So effectively the inside interface of the existing firewall now becomes the outside inte...
We currently have CSS 11154 running within our test environment. I have issued the "no restrict web-mgmt" command with facilitate device management via a browser. This seems to work fine when I access the device via one of the vlan interface of the C...
I'm a newbie to content technology. I've recently implemented a css 11154 into our test environment and done the configs. Everything seems to work fine, however when I took the webserver off line the Sorry server displayed "page cannot be found" ins...
Installed VPN 3.5.1 on a laptop running W2K, when I tried to connect to the PIX it displayed the following message "Remote peer is no longer responding" however it worked on a home PC running W2K and also on WIN 98 laptop/desktop.The problem seem to ...
Hi, We currently have remote access vpn in place and working fine. What I now what to do is to restrict access for a particular external client to a single host within our network, while still allowing full access to everyone else. Is this achieveabl...
The idea of load share is that you specify which traffic (using route map) goes via a particular link. If you do not specifiy this then the second link will not load share.
This sounds more like a OS (i.e NT) permission problem. Since you can telnet to the devices on the DMZ, this indicates that the network is intact. Since you cant access the network resources i.e map drives this indicate that you're not logon on to th...
