I confiugure my MOH sources to be sent out via Multicast everything seems to working. I can see the mulitcast group being registered in the 6513 with and 8 port T1 blade. And I can see the devices join IGMP group. The problem is that all phones on th...
Has anyone got faxing to work with the ATA186 through a PRI gateway? It keeps failing on the 3rd or 4th page? I have upgraded it to ver 2.14 and the 3660 router is running 12.2.8T3. Faxing across LAN/WAN works fine with no problem. All pages send and...
In Service Parameters Configuration-Cisco CDR insert-there is no Parameter name, Parameter Value or suggested Value. I have installed CAR and can see all the CDR should there be a value in here?-Stephen
My CM CPU is pegged at 100% it looks like the svchost.exe process. Has anyone seen this in CM ver 3.2.1? I know that older ver had this and it was fixed with win sp2. The box already has sp2 installed should I reinstall the sp? - Stephen
Ron,The telecom carriers in both Shanghai and Taipei have special requirements in terms of how they handle ISDN-2 (BRI) circuit provisioning. There are two numbers assigned to each BRI circuit; one is considered primary and the other secondary. The...
To make it to work you need to ensure that name resolution works. So you can resolve (domain.com) into the local domain controller. The other thing to do, is to change the password for cti user to be "ciscocisco". Also AD integration brakes USER- PHO...
To make it to work you need to ensure that name resolution works. So you can resolve "xxx.com" into local domain controller. The other thing to do, is to change password for cti user to be "ciscocisco". Also AD integration brakes USER- PHONE associat...
Glenn,I had a nightmare with the ATA's here is what we found out.ATA Booting ProcessWhen the Analog Telephone Adaptor first boots, it attempts to TFTP its configuration file from a TFTP server. If both the UseTFTP and TFTPURL parameters in the devic...