Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I plan to use 3 3508's as Concentrators for 16 3548's supporting 700 PC's.My question is: Should I link the 3508's together with "GigaStack" cards or use 1000Base-SX cards, and what is the advantage of one over the other?
I have a Cisco 3000 VPN box with 3 SEP200 U cards. Running latest software.When I Telnet into console, the system goes to 100% utilization as indicated by blue front panel lights, and freezes. Have to power cycle to re-set box. Anyone else experience...
Am finalizing the design of our new corporate network. It will consist of the following:Work Station Access - 3548 XL Switches - 2 per floor (one East / one West) ; total of 14 for seven floors. Each side of a floor will be a separate VLAN (Subnet). ...
I am finalizing the design of our new corporate network. It will consist of the following:Work Station Access - 3548 XL Switches - 2 per floor (one East / one West) ; total of 14 for seven floors. Each side of a floor will be a separate VLAN (Subne...
You'll have to isolate the problem. First, check your Comm port setup on the pc your dialing from. Many times, the pc will default to that speed no matter what speed the modem is set at. Try also from the other end (from modem mod to pc)Try another ...
You could try adding one of these two to command string: & -- Wait for &T "bong" tone for credit card dialing before continuing with the remaining dial string. @ -- Wait for silence. The modem will wait for five seconds of silence before dialing ...
