Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We are running CiscoWorks RME 4.3 and forwarding syslog messages to another syslog server. To forward messages we use script from https://supportforums.cisco.com/docs/DOC-11592All is working great at the begining of month. With growing of syslo...
Hello!We are running CS-MARS 6.0.5 at customers site and trying to add one PIX 525(7.2.4) and ASA 5550(7.2.4). Adding of admin context works ok, but discovery of contexts doesn't work on either platform.We are accessing devices with SSH access. Every...
Hello!We have ASA with software 7.2.4 configured for AAA on ACS v4.2. Configuration is as follows:aaa-server TAC protocol tacacs+aaa-server TAC (mgmt) host 192.168.1.11key ciscoaaa-server RAD protocol radiuskey ciscoaaa-server RAD (mgmt) host 192.168...
Hello!I have a problem with 802.1x (PEAP) authentication for wired clients. If the option "Log On To" in AD is enabled, authentication failed. Without this option everything works fine.I suspect that I'm missing something in ACS configuration which u...
Hello!Is it possible to create redundant interface for subinterfaces or is it only available for physical interfaces?I have one ASA connected to two C3750 which are stacked, and few VLANs that are connected to ASA's subinterfaces via trunk.Thanks!Mar...
Hello,We are hitting same or very similar bug with SNMP daemon with 5.3 patch 2. ACS is in HP NNMi 9.10 and after few days it stops responding on NNMi polls. Number of days is random (no pattern or same number of days between failures).Quick fix with...
Thanks guys for quick responses!@chitrungtranThanks for sharing info. Unfortunately, we have to use informs, so I need to find a way to configure it with good source. I'll post solution if I find any.@JosephThanks for suggestion. I already opened TAC...
Hello,we are also migrating from traps to informs and I can see that this source-interface issue is still open. I can confirm it is happening on Cisco 7609-S with IOS: 12.2.(33)SRD5, SRD6 and SRE2.In bug toolkit I can see it opened for 6500 under CSC...
Hello,Thanks for the link. That is exactly what I needed for workaround solution to work. Now I will have Kiwi Syslog Deamon on UDP 514 and CiscoWorks on UDP 1514. I will use Kiwi to forward (with spoofing) syslog messages to CiscoWorks and ArcSight....
Thanks for the explanation.As solution with two syslog files is not possible, is it possible to change syslog port for Common Syslog Collector?By default it is UDP 514, I would like to change it to something like 1514, but I can't find anywhere how t...
