Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!
Bigger boxes offer "debug ip igmp" for real time debugging/logging multicast groups joining, leaving, etc..Is there anything similar on the smaller CBS250/350 series?
If not, does anybody have an alternative how to achieve this look under the ...
Dont overthink it guys.When Cisco states, that the 9000 does not support PTPv1, then this does not mean, that you cannot run PTPv1 over it. It only means, that the 9000 does not do anything with such packets! (BTW: Dante does not expect the switches ...
Hello!Just for completeness. There is a totally different approach to get rid of this problem.Audinate was orginally designed to work in a local subnet only without any "advanced" topology whatsoever. Hence the whole mDNS or discovery and the like.Au...
Thanks for replying.
As people way smarter than me found out, QoS normally does not help you all that much in real life for ptp troubles. In other words to not expect QoS to be the solution unless you have a decent loaded network.The way it was expla...
We can close this thread as the latest RoomOS indeed offers AES67 support for many collab devices. You can tick this one off your wish list.
https://help.webex.com/en-us/article/zks7jeb/AES67-interoperability-on-Room-Devices
Very interesting. Since this post is quite old: Did you manage to solve this one?MY question/suggestion would be to change your trunks. To my knowledge putting PTPv2 traffic into a multi-vlan trunk is never a good idea. I know of multiple manufacture...