Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How can ISE on last state of clients
My clients are installed Posture agent and I had configure authorize to be like this pic It's working fine clients can redirecting to url to download an agent to install and posture can health checking and CoA to ...
I have use ISE 2.4 do BYOD with vWLC 8.2.100.0 version and I have use NSP_Onboard Authorization profile, Clients it doesn't get an ip address, So I have try create new Authorization profile in other name but it does the same then I have try to remove...
I forget to tell something
If i do select ISE NAC on the NAC State, Client will not be able to get an IP Address, If I choose none Client will be able get an IP Address
And I Have debug aaa I found URL and ACL are send to client but I'm not sure d...
Attributes Detail inside NSP_Onboard It had already ACCESS_ACCEPT then the client are allowed and should be able get an IP Address From DHCP and I use av-pair to override This is client
Access Type = ACCESS_ACCEPT
DACL = PERMIT_ALL_TRAFFIC
cisco-av-p...
I Found in document vWLC can working only on FlexConnect
https://www.cisco.com/c/en/us/products/collateral/wireless/virtual-wireless-controller/qa_c67-715130.html
