About laner61

laner61 · 09-10-2014

I have an internal VOIP voicemail/presence server I want accessible from outside my internal network. Connecting internally works great, but when a user tries connecting from outside, there's no availability. When I try to use NAT, the voicemail-to-e...

laner61 · 06-30-2014

Our marketing office is across the street from our main building. Both buildings have their own independent internet connection. The users in marketing connect to the server at the main building via a wireless bridge. The wireless connects to a RV082...

laner61 · 04-22-2014

This is my first try at setting up a site-to-site VPN on ASA 5505s. Thankfully I'm able to do so on the bench and not at the actual sites. Once I can confirm connectivity, I'll move them to the physical sites.Both ASAs are running 8.3(1). I've tried ...

laner61 · 03-08-2013

At one point I'd setup access for a VPN. I would now like to remove it, but can't find a way to "no" out the commands. Here's config from my PIX 506e:***fixup protocol dns maximum-length 512fixup protocol ftp 21fixup protocol h323 h225 1720fixup prot...

laner61 · 03-07-2013

I’m adding a Cisco 1140 access point to my wired network. It is mostly for guest access, though I’m also carving out access for employees with wireless devices accessing our company resources.The issue I seem to be having is with getting to the inter...

laner61 · 09-12-2014

Packet tracer output to mapped (public) address:ASA# packet-tracer input outside tcp 1.1.1.1 8080 xxx.xxx.xxx.217 8080 detailedPhase: 1Type: UN-NATSubtype: staticResult: ALLOWConfig:object network VMSERVER nat (inside,outside) static xxx.xxx.xxx.217A...

laner61 · 09-11-2014

Thanks for your reply, Jouni. I recently read your post on ASA NAT 8.3+. It was very interesting, but I have some difficulty grasping distinctions between types.I tried the configuration you recommended, though it did not resolve my problem. I will u...

laner61 · 04-23-2014

Success!!Here's the output:CATC(config)# packet-tracer input inside icmp 192.168.52.8 0 0 192.168.200.5 detailPhase: 1Type: ACCESS-LISTSubtype:Result: ALLOWConfig:Implicit RuleAdditional Information: Forward Flow based lookup yields rule: in id=0xc9...

laner61 · 04-23-2014

Here's the results of sh run nat:MAINnat (inside,outside) source static INSIDE INSIDE destination static CATC CATC!object network INSIDE nat (inside,outside) dynamic interface---CATCnat (inside,outside) source static INSIDE INSIDE destination MAIN MA...

laner61 · 04-23-2014

Update: after applying the sysopt noproxyarp command to the outside interfaces, I tried pinging both the CATC ASA and internal workstation to the MAIN ASA LAN port (192.168.200.1). I received replies!! And, the VPN monitoring shows an open tunnel.I t...

Member Since	‎11-15-2004 02:06 PM
Date Last Visited	‎08-31-2018 12:01 AM
Posts	21

User Statistics

User Activity

ASA 5505 (8.3+): Problems getting internal server NAT'd properly

2nd WAN port on RV082 as bridge

First shot at site-to-site VPN fails

How to remove aaa-server from PIX

VLAN through PIX

Packet tracer output to

Thanks for your reply, Jouni.

Success!!Here's the output

Here's the results of sh run

Update: after applying the