Hi , I have a peculiar problem. My cisco VPN client works well with all systems but when tried on Windows Me i get the error " The necessary VPN subsystem is not available" . Genrally on other systems i start the Cisco VPN client service in ...
Hi, I have two offices LocA and LocB from both these locations i have a link our parent company LocZ. ( Say LnkA and LnkB respectively ) My problem is to route a particular machine in LocA , which is trying to contact a machine in LocZ through...
Hi , I am using a cisco 1600 to connect to my other office for providing internet access. My Cisco 1600 (a) at location A is connected to the internet on its eth0 and i have a BRI connected to it. (say number #123) . My second Cisco 1600 ( b) at...
Hi , Users in our remote office have a problem connecting to our VPN . The remote office has a ADSL router to connect to the internet. when they connect to the VPN and give in the user name password, they get the message " Securing t...
Hi , We have 2 VLAN with acess lists such that no machine in VLAN 1 will talk to a machine in VLAN 2. Now we have an issue with this ... we want to allow neeting to work betwween the machine in VLAN 1 and a machine in VLAN2 how is this possible ....
Hi , Before you try to re-install the VPN iwould suggest you to check if the Cisco VPN service is runnning . You can check this from the services.Thanks and reagrds,goutham bharadwaj
Hi, You can do this using any cisco low end router with onr BRI and one ethernet interface. ( my choice a cisco 1600 )i can send you the required configuration on the router , to a email address.you can mail me at - gouthamb@hotmail.com
Hi , I have the dialer group configured on both the routers . . which permits all ip trafiic as intresting traffic .. any other reson why this may not work .. ?
Hi Bruno, This error is typical when the file "DNE.SYS" file is missing from the system. copy this file from an other machine into this machine at the same location where it existed on the previous machine.This should solve the proble...
hi dale , this problem will have its dependency on the routes that you have in the concentrator. if you have enabled browser based configuration .. you can check the static routes ( or ospf etc..) that you have put in the co...