About rgoolsby

rgoolsby · 07-16-2002

We have 2 MC3810s connected together via a T1 lease line using frame relay encapsulation. Each MC3810 has a DVM connecting a PBX. Both MC3810s are configured with a cross connect between the MFT and the DVM.We are experiencing voice quality issues,...

rgoolsby · 05-11-2005

Yes, it can be done by either a translation rule on the gateway like this:translation-rule 1Rule 1 ^.% 9Dial-peer voice 1 voipTranslate outgoing calling 1 !--- Apply translation-rule 1 to the calling number !--- of any call outbound on the VoIP dial ...

rgoolsby · 05-11-2005

Daniel,I have never connected to a non-Cisco Call Agent, but I assume the configuration is very similar to the information provide in the URL.I would try the following commands on the gateway:mgcpmgcp call-agent service type mgcp version 0.1mgcp dtm...

rgoolsby · 07-16-2002

Are you using QoS?

rgoolsby · 07-16-2002

What kind of quality issues are you having?

Member Since	‎05-16-2002 09:40 AM
Date Last Visited	‎06-27-2021 12:04 PM
Posts	7

User Statistics

User Activity

QoS on MC3810 with a CCS cross connect

Re: formatting IP Phone's "missed calls"

Re: IOS MGCP Gateway configuration assistance

Re: Voice Quality

Re: Voice Quality