About bob bob

bob bob · 10-13-2015

I have a number of 2960s switches running c2960s-universalk9-mz.122-53.SE2 I am looking at the logs and I see a number of interface up down entries I am not sure is this is a bug, normal behavior, or an underlying problem. I have checked the cabling ...

bob bob · 06-30-2014

I have a Cisco 881 which is to be connected to a vendors switch (also Cisco) every time I enable the interface the port comes up up then transitions to down down and the indication light on the 881 stays amber. My thought is that they have port secur...

bob bob · 07-25-2013

We have a dmvpn hub in the states with 150 clients which are working well, but recently we installed a 881 in the UK that is giving me trouble.I'm able to get consistant pings from my dmvpn hub's outside address to the 881 dmvpn hub's outside address...

bob bob · 04-25-2013

Can someone give me a hand understanding zone base firewalls? I attempted to make the ip address 10.2.22.231 availible to the outside world using port 80 and 443 on external interterface(4) public IP address. I can see hits on the ...

bob bob · 12-28-2022

Has anyone been able to get this working on a 9200L? I'm running 17.6.3 Have tried lldp, cdp, power inline static max 30000 to no avail. Dec 28 17:29:20.483: %ILPOWER-5-DETECT: Interface Gi3/0/3: Power Device detected: IEEE PDDec 28 17:29:21.472: %I...

bob bob · 06-19-2019

873877 %PUNT_INJECT-5-DROP_PUNT_CAUSE: punt cause policer drop packet casue 60Jun 19 09:32:52.703: MCPRP-QFP-ALERT: Slot: 0, QFP:0, Load 97% exceeds the setting threshold(80%).

bob bob · 06-30-2014

Another thing I noticed is the interface comes up and goes back up about once a minute007395: Jun 30 13:58:44.488: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to up007396: Jun 30 13:58:46.536: %LINK-3-UPDOWN: Interface FastEthernet3, chang...

bob bob · 06-30-2014

Hi Paul,It would be a switchport. here is what the vendor sent me as far as their endinterface GigabitEthernet0/1 description CUST ROUTER switchport access vlan 9 switchport mode accessendThe vlans are different, but that shouldn't be a problem, I t...

bob bob · 06-30-2014

Thanks for your reply,Yes copper. I tired setting the interface to 100 full, still having the problem.

Member Since	‎09-01-2011 12:33 PM
Date Last Visited	‎11-19-2023 06:04 AM
Posts	15
Total Helpful Votes Received	25

User Statistics

User Activity

C2960s Mysterious switchport Up Down logs

fastethernet port comes up and then goes down lost carrier

packet loss across DVMPN tunnel on high latency link

Zone Base firewall Nat issue Cisco 881

Re: Cisco 2960X and 9200L POE support for Paxton

Re: CSCvj62552%20-%20%22punt%20cause%20policer%20drop%20packet%20casue%2027%22%20logs%20Subscriber%20session%20control

Another thing I noticed is

Hi Paul,It would be a

Thanks for your reply,Yes