Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Experts,My customer is looking into deploying 802.1x, EAP-PEAP with EAP-GTC and an inner protocol. They want to use hardware token card as an additional security in case the laptop got stolen. Does anyone see an issue or anything we need to kno...
I configured identity static NAT on my ASA specifying a range I.E. "static (inside,outside) 10.10.10.0 10.10.10.0 netmask 255.255.255.0 and now the outside users cannot connect to inside WEB server which has IP address of 10.10.10.51. Do I need to cr...
Here is a link for SSH configuration that outlines the version and commands to enable SSH on IOS router.http://www.cisco.com/warp/customer/707/ssh.shtmlJS
What is in list 1? Remember that PIX will try to do a NAT also. Make sure you've configured NAT 0 on the PIX to disable NAT for the LAN or create a approproate NATing on teh PIX for servers.JS
IOS version 12.2(13)T supports Multipoint GRE feature which will allow your GRE tunnel at the ADSL side to use a dynamic IP address. Search CCO for mGRE and DMVPN (dynamic multipoint VPN) documentation.
Simon,If you have registered access to CCO then you should be able to access to this link. Hope this helps.http://www.cisco.com/warp/public/707/index.shtml#pixJoseph
If I understand you correctly, you mean applying the same ACL on the same PIX firewall's inside interface (for incoming traffic from inside LAN) and then use it as a crypto_ACL. If this is the case then it will of course go through the interface ACL ...
