Hi all, I manage a school environment with 4 locations. Until last year, there was one Cisco 3504 and 20-30 1832 APs at each site. Then came a central vWLC to manage all 4 locations. This is installed on a HyperV at one of the 4 locations. With the m...

Hi all, we have some Nexus 9K switches and a CSLU and a CSSM on prem that are already working successfully with other devices. We have some Nexus 9K switches and a CSLU and a CSSM on prem that are already working successfully with other devices. We'v...

Hi all, we have installed a Cisco CSLU in our network because the direct connection of all network components to the CSSM is not feasible. Some switches are already successfully registered via the CSLU. Now we have found that there is no way to confi...

Hello wireless community, we have 4 small locations, each with a Cisco 3504 controller and 15-20 x 1832I APs each, plus another bigger location with a vWLC and about 80 x 1832I APs. So far the firmware 8.9.100 was used and everything ran smoothly wit...

Hello,we have some Cisco 9500 switches. I wanted to restart one via CLI with the normal reload command and then the following error message came up: ***ERR - AdelphiI2cWriteACT(247): I2C access failedI2C controller is in error state, reg value: 0x000...