Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi team,
I am reading the Cisco doc "VXLAN Network with MP-BGP EVPN Control Plane"
http://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-734107.html
I know the VLAN ID is locally significant in the context o...
As my another discussion suggested, I have VIC 1240 and 1280 adapters installed on the B200 M3 blade.Automatically UCS will create 4x20G port-channels between the adapter and the blades. So we have 80 G total b/w to the FI from the blade. 40 G to sid...
Hi team,Have to quickly configure the UCS to provide 80G link from B200 M3 blades to FI.I have two adpaters: 1 VIC 1240 (VIC1240 is in the mLOM slot), 1 VIC 1280 and IOM module is 2208xp. After tchecked the doc, I found the solution as attached. But ...
Hi all,We have ERSPAN configured on Nexus1000v to monitor the web server traffic.We cant see any TCP out of order traffic on the web server. But On the destination of ERSPAN, we can see a lot of "TCP Out of order" traffic (about 12% -15%). According ...
Hi all,we have ucs fabric interconnect which connect to vPC domain (2 nexus 7ks), each fabric interconnect has 8 uplinks to 7k paris (4 uplinks for each 7k)those 2 Nexus7k are running on the same firmware and ucs fabric interconnect connect to the sa...
Hi Steve,We have did the TCPDUMP on our web server. We cant see any TCP out of order of inbound and outbound traffic for web server.So we suspected that TCP out of order is introduced between ERSPAN source and destination.Best Regards
As the LB1 and LB2 never use the cluster MAC to send any traffic out, all layer 2 devices wont see the cluster MAC as source MAC of ethernet frame. So you wont see cluster MAC in their MAC address table.Cheers
