I have an issue with message waiting indicator. It works but has serious limitations. Let me explain, hoping someone can help. IOS Version: Version 15.1(4)M4bThe mwi ephone-dn's:ephone-dn 599number 8001.... no-reg primarymwi off!ephone-dn 600number...
I had a problem with a new UC560 whe I upgraded to 8.6.1. The VoiceView Express would let you log in and see all your messages but "contact your administrator" message appeared when you tryed to "Listen" to the message.I fixed it by doing the followi...
On a UC560, how many concurrent calls can be placed to the AA in CUE? I see there is a limit of 12 sessions, which I interpret to mean 12 concurrent calls? Does anyone know where to find documentation that discusses this?Thanks...
This document describes how to program a UC500 to accomodate multi-tennent scenarios. This is for engineers that wish to use a UC500 to service more than one client. This will describe how to program the dial-peers, etc to allow this.
Just a quick note to let you know that the BE3K Version 8.6.2 can be upgraded with a regular LG DVD player/burner. I was told in training that I needed an DVD with extenal power as the BE3K does not prvide power ofer USB. This is incorrect...
I had this issue, UCCX System version: 11.6.1.10000-51.
I resolved it by removing the Agents UDP Profile and IP Phone Mac Address from RMCM Application User in CUCM, them put them back in. Agents logged out, power cycled IP Phone and logged back in...
Hello,I am having the same issue. The Telco is sending INVITE with the username, which is an active DID number. My issue is, I can't translate the To: number to the extension. Customer-UC560#093539: Sep 2 15:09:38.772: //-1/xxxxxxxxxxxx/SIP/Msg/ccsi...
Great...I saw connection-reuse in sip-ua. Not sure how it got there. But removing it fixed it. I now see these calls being active for only a few seconds.Thanks a million...
Thanks Alexander,I have another system running the exact same IOS, it works perfect. My voice service voip is below;voice service voipip address trusted list ipv4 0.0.0.0 0.0.0.0allow-connections h323 to h323allow-connections h323 to sipallow-connec...
Perfect timing. Please read my document. It will demonstrate how to maintain seperate dialing pools.https://supportforums.cisco.com/docs/DOC-26186...dave