Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I just installed a Netgear MR814v2 DSL router at a location. They are using a Aironet 4800AP to connect all clients internally. Can this AP bridge or repeat with the Netgear so they can use it at their default gateway? I can't find anything...
I have an aironet AP that is atleast 3 years old. I just bought a Netgear Wireless Router. Will thie Aironet AP be able to connect with my Netgear router within the same wireless network?
We currently run fiber with our 1900's and 2924xl's. We are looking to upgrade to the 3750G and can't find if it will be compatible with our current fiber setup. Do SFP ports work with the type of fiber ports on the 1900 and 2924's?
Need some help. We currently have 8 VLAN's coming in on one interface and they each run their own appletalk zone. I would like to prevent each zone from being seen in the other subnets. Do I need to stop it on the subinterface or in the main route...
Here is a setup. Wondering what kind of speed I should see end to end (estimate).P4 2.4 Server-100MB>>2950-100MB>>converto to fiber>>Telco 2950-100MB>>2691 Router-100MB>>2924-100MB>>Workstation-100MBI'm only getting about 1MB sec.. Should it be more...
here is the issue. I have the Cisco AP on another building and the signal is just strong enough to get to all the clients. I figure adding the wireless router also lets me quit internet sharing out of my XP box as well. I just want to know if the ...
Thank you for the reply, it got me started. Here is the problem I am running into now. I want one other zone to be able to see this zone. How do I set that? Is it an in or out apply or both? Here is the current access list:access-list 601 permit...
We have 100MB links to each site, but the 2621 can't process that type of load. We have 2 subnets here at the central location and on the same subnet we can do almost 4mb/sec transfer if we transfer between subnets it is like 500-750k/sec. The real...
