Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,it seams my phase 1 is up and nothing on ph2 but on the remote site the log shows an error on phase 1 (status negotiate_error and error reason peer notification)I’m not sure if the Cisco can do with the encryption set the AES256 as in the config i...
I have to upgrade from a UCM6.1.4 to 6.1.5 to move finaly to 8.6The old server has not enought place on the HD (original cames from 4.3) so the solution is to install 6.1.4 on the new server, move the data from ols server to the new on under 6.1.4 an...
Hi,I do have 2 routers that I want to connecte by L2L Tunnels.My config works from site B to site A, I can bring the tunnel up and both site communicate in both way.But the site A can't bring the tunnel UP. It seams that, as long as the IPSEC part st...
Hi,I did add permanent licence upgrade on a C1861-SRST-C-B/K9 to upgrade from 8 to 15 user.The licence file is on flash and when I try a "licence install flash:xxxxxxxxxxxx.lic it makes an error as it is allready installed :Installing...Feature:c186...
Hi,using a ISR1861 with his factory ISE.IOS 15.0(1)M3 / CME 7.1Unity Express on ISE 7.0.5Is it possible to personalyse a voicemail prompt with a message and play the voicemail prompt but without giving to the caller the opotunity to record a message ...
I fogot to give the version of the 1841:c1841-advipservicesk9-mz.124-3a.binHope this helps also.... SOLVED on 04/14/13Solved with a TAC case as here no answer. Solution:crypto ipsec transform-set pfs-set esp-aes 256 esp-sha-hmac to correct the ...
I still have problem on installing the ISO I get from TACI have the same error on Client as on Server ESXi and ESXDid try to install them on ESX1.0 and also on ESXi Vsphare 4.1.0 Buid 258902I do attache a screen copy from server resume and the screen...
Is it possible to install them on VW Workstation 7.0 to do the upgrades or does it need a full VM server version?It makes an eror on Workstation even trying from DVD as from .iso file I get from Cisco. After creation from VM server, durring running o...
I have to go this way because the actual running server is on 6.1.4 and it has not enought disk space to do even the upgrade from 6.1.5 nor the upgrade to 8.6... That is the raison why I want to upgrade on the new server. The actual running server i...
In fact, I did try to do it with the CD from 6.1.4 I did generate from iso file I get from TAC. If I do an install/upgrade from CCM Administration it tells me that it is an older version and so no upgrade possible. When I do a boot on the generated ...
