About Kasi Viswanathan

Kasi Viswanathan · 11-01-2014

Hi Experts,Need your help, advise and support to fix the below issue in bringing our networkJust extended our intranet buildings with Fiber Optic Connectivity with the Following ComponentsData Center Building1. SG2000 - CISCO2. 24 port LIU - MOLEX3. ...

Kasi Viswanathan · 11-11-2014

Hi.,I am sorry for delayed reply.This issue has been addressed and fixed. To update what the issue was.1. When we connected the SFP Ports to the corresponding locations, link was up but it did get pass traffic through, as I was tailing my DHCP server...

Kasi Viswanathan · 05-03-2013

Hi, I too experienced a similar issue when connecting a cat 6 cable between GIGABIT switches, it doesnt seem to work, but when i connect one end to Fast Ethernet, it simply works fine.We tried different ports, different switches, different cable but ...

Kasi Viswanathan · 12-25-2012

Hi, I tried configuring the route on the DHCP Server like belowroute add -net 172.16.4.0 netmask 255.255.255.0 gw 192.168.1.220172.16.4.0 is my client network at VLAN 20192.168.1.220 is my DHCP Server(Linux VM)It still doesnt work. Please help where ...

Kasi Viswanathan · 11-26-2012

Thanks for the quick response.I meant the client's DHCP DISCOVER broadcast packet is not coming to the DHCP Server.As far as i understand, the below process happens on a DHCP. Please correct if i m wrong.Discover: The DHCP Client sends a Broadcast to...

Kasi Viswanathan · 11-26-2012

Hi Thomas, Could please let me know what route should be in place?Since we are in the deployment stage, we just created 2 VLANs, VLAN 10 & VLAN 20.DHCP Server in part of VLAN 1 (DHCP Server IP : 192.168.1.220)Switch Management IP: 192.168.1.230Client...

Member Since	‎11-25-2012 09:06 AM
Date Last Visited	‎08-18-2017 04:00 AM
Posts	7

User Statistics

User Activity

SGE2000 - SG300 - MGBLH1 - Connectivity/DHCP/VLAN

Hi.,I am sorry for delayed

Re: Connect 2 switch cat6

SGE 2000 - DHCP Relay

SGE 2000 - DHCP Relay

SGE 2000 - DHCP Relay