Hi All, Just to let you know. With the update, the AP joined the WLC, but there is more problems now. The WLC is updated with code 7.3.103.3 sent by Cisco TAC. The antennas of AP are down and it does not come up. The output of the switch port that AP is connected is Interface Admin  Oper       Power   Device              Class Max                             (Watts) --------- ------ ---------- ------- ------------------- ----- ---- Gi0/20    auto   on         14.1    AIR-CAP1552E-N-K9   3     15.4 Interface  AdminPowerMax   AdminConsumption              (Watts)           (Watts) ---------- --------------- -------------------- Gi0/20                15.4                 15.4 Maybe the switch isn't providing enough power to the AP, so next wednesday we'll try a power cable. And another problem is the status of the interface in "interface" tab in AP. The status is " Not Supported " for 802.11a/n. The Cisco documentation says that the AP is correct. Rodrigo ... View more

Scott, Big news to me. Last Saturday I tried to add the 1552E to a 5508 with firmware version 6.x in local mode. I realized that I need to upgrade to 7.2, so I'll do next Thursday. I was in doubt about config the AP in local mode, but after read your post, I'm sure it will work. Thanks. Sent from Cisco Technical Support iPad App ... View more

Thank you for the answer, Logan. I tried with 4 entries and it worked right, but with 'url services ....', not 'url directories' ..... But, if I want to input many entries. How can I do the search in this entries? Rodrigo ... View more