Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,When running OTV between two ASR 1k routers at a single site, do you need to enable Spanning Tree on the ASR 1k routers?I read somewhere that this is the case but wanted to check with folks who have set this up or if anyone from Cisco can advi...
Hi All, I'm experienced with most of the Cisco LAN switching portfolio but had a question asked of me about setting speed and duplex on a 6880-X switch. The customer is not using Instant Access clients, just the 6880-X chassis in VSS mode with a mix...
Hi folks, I'm currently working on converting some PIX firewall configs to ASA and wanted to check I was on the right track, as I don't currently have the ASA's so doing the configs up front! Everything seems straight forward in the conversion and I'...
Hi All,I have an update on this after speaking to a Cisco SE.It is actually a bug in certain software versions, where you can see the bug at the following location and software versions with known fixes.https://tools.cisco.com/bugsearch/bug/CSCup9213...
Hi Reza,Yes, it's platform specific as to the speeds that the GLC-T can operate at, but it's capable of 10/100/1000Mbps on several platforms.I was trying to get a response and a show int status from someone with a 6880-X and GLC-T's in it before I we...
Hi Reza,Thanks for the response, but it is only partially correct.The GLC-T is gig capable but on certain platforms it can operate at 10/100/1000Mbps. "The 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link ...
For this to work, you need to ensure two things; the DHCP server has the correct options configured and that LLDP is enabled on the LAN switch globally or the specific switch port that the phone connects to. The IP phone should also have LLDP enable...
