Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to set up a custom DHCP scope option in a Clean Access Server. The option to do that provides a blank text box and says to enter the appropriate text for an option. Anyone know the syntax to provide in this text box?
I have a PIX 506 (v6.2.2) that is set up as a hardware client to a VPN 3005 concentrator. The tunnel works fine, but the application I am using requires being able to ping and SNMP query the PIX inside address from the 3005's network (which currently...
Does anyone know of a way to route inbound PSTN calls to a single extension if a particular DID has not been assigned to a phone? I do not want to create a bunch of CTI phones; I'm looking to do something in the gateway so that if a DN doesn't exist ...
Do you mean that callers to these extensions go straight to VM without ringing the phones first, or are the phones getting set to call-forward-all to VM 'by themselves'?Option one could mean that the phones are losing connection across the MPLS and c...
Make sure the device you set up in Call Manager is called "chvg224" or, if you have a domain name in your router config, "chvg224.yourdomain.com". Though, by your symptoms, it looks like you got that far already.Also, to have your dial peers created ...
There is some multicasting VOIP support available on Cisco routers (called Hoot and Holler), but there are limitations in terms of number of streams - I believe 3. Not sure what you can do with your MCU, especially if you want the master phone to cal...
The port on the CE500 should be set as a router, otherwise DHCP from/through the router will not work. Setting the port as "trunking" is not possible on a CE500 switch; you must choose predefined smartport types.Set up your router port as a Dot1Q int...
