Hi, i have a problem on redistributing OSPF,EIGRP & Direct connected on my Nexus 7000. Here is My topology   LAN--------N7k Vdc 1 (OSPF)---------------(OSPF)n7k vdc 2(EIGRP) -----------------------(EIGRP)Router ------WAN   I dont know if there s a problem on my route map, in each of those device are not accepting routing from redistribution. i want on VDC 1 its should have a routing table from VDC 2 and Router antind VDC 2 and Router should have all the device routing table.te Note: - Router is a Vendor Device,dont have the configuration. - the EIGRP and the and OSPF are running well. - VDC 1 have ospf table from VDC 2,but not learn EIGRP table from Router - VDC 2 have ospf table from VDC 1 & have EIGRP table from Router - Router not learn any ospf table from VDC 2 and 1   Here s my Configuration:   VDC 1   ip prefix-list 10 seq 5 permit 10.49.0.0/16 ip prefix-list 10 seq 10 permit 10.53.0.0/16 ip prefix-list 10 seq 20 permit 172.16.10.0/24 route-map OSPF_redist permit 10   match ip address prefix-list 10     ------------- Some of Vlan---------- interface Vlan3   no shutdown   ip address 10.5x.x.1/26   ip router ospf 1 area 0.0.0.0 interface Vlan4   no shutdown   ip address 10.5x.x.129/26   ip router ospf 1 area 0.0.0.0 interface Vlan5   no shutdown   ip address 10.5x.x.33/26   ip router ospf 1 area 0.0.0.0   interface port-channel1   description "Connect to VDC 2"   ip address 10.5x.x.41/30   ip router ospf 1 area 0.0.0.0 router ospf 1   router-id 10.6x.x.69   default-information originate always   redistribute direct route-map OSPF_redist   redistribute static route-map OSPF_redist   default-metric 1   VDC 2 ip prefix-list 10 seq 5 permit 10.4x.0.0/16 ip prefix-list 10 seq 10 permit 10.5x.0.0/16 ip prefix-list 10 seq 20 permit 172.1x.10.0/24 route-map OSPF_redist permit 10   match ip address prefix-list 10   interface port-channel3   description "Connect to VDC 1   ip address 10.5x.x.33/30   ip router ospf 1 area 0.0.0. interface Ethernet2/43   description "Connect to Router G0/0"   ip address 10.49.3.74/29   ip router eigrp 500   no shutdown   router eigrp 500   router-id 10.x.x.67   default-metric 1000000 1 255 1 1500   redistribute direct route-map OSPF_redist    redistribute ospf 1 route-map OSPF_redist router ospf 1   router-id 10.x.x.67   default-information originate always   redistribute direct route-map OSPF_redist   default-metric 1   redistribute eigrp 800 route-map OSPF_redist Did i miss something,even i cant redistribute direct connect to each device.               ... View more

Anyone please Help me ASAP. I need to connect my cius to office lan while in public network, so i can dial ext office number or access cam in office. I already connected to my ASA with anyconnect application (i already buy the license for mobile),but in CUCM the device its not registered. I try to ping from ASA to my CIUS there is a lot of RTO n less reply,ping time is over 800ms.  note : If i use office wireless network my CIUS work properly,its registered in CUCM. so its just a network problem (bandwidth), or there's some configuration or another step that i missed. ... View more