Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.Can you help me please.I have in the same switch WS-C2960S-24PS-L (12.2(55)SE5) one WLC with 3 EP like that :* Port Gi1/0/24 : WLC 2406 (7.0.220.0) port1* Port Gi1/0/4 : EP AIR-LAP1142N-E-K9 * Port Gi1/0/7 : EP AIR-LAP1142N-E-K9 * Port Gi...
Hello,I have a remote site with 5 peoples with ASA 5505 just behind the ISP router. I keep observes message like this in my syslog servers. Nov 26 09:42:21 Nov-******** 26 2012 09:42:21: %ASA-4-733100: [ Scanning] drop rate-1 exceeded. Current burst ...
Hello.I must separate the network "AP-Manager/management" and my Prod Network ? I don't understand this documentation.I insert my network diagramm. Do you see my problem?Thank you for your help.Best regardsStéphane
Hello.When I remove trunk in APs my network guest not working. The step "Authenfication" not working. I have enable web authentification in my WLC.When I enter swithport mode access I don't arrive to ping my endpoint it's normal?Thank you. Stéphane
Hi everyone,I still observe these message in my syslog permanently. Dec 3 04:34:50 Dec-****** 03 2012 04:34:50: %ASA-4-733100: [ Scanning] drop rate-2 exceeded. Current burst rate is 0 per second, max configured rate is 8; Current average rate is 8 ...
Hello,What's the output of :sh running-config policy-mapIf you have somthing related to inspect esmtp here, you can disable it with the following command : no inspect esmtpOf course, you need to apply this command to the relalated class and the relat...
