Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,having great difficulties in making these 2 hardwares establish a tunnel. The PIX is running 2 other tunnels already and is having no problems there. The remote-client has recently changed to a Sonicwall VPN 3030and now the tunnel will not work. I...
Hi,I have set up a Cisco PIX 515 with VPN access for clients from the Internet. My question is as follows:some of the people who will be using the VPN connection are consultants in their own fields of work and already have a Checkpoint VPN clients in...
Hi,anyone know if it is possible to downgrade a Cisco PIX from software version 7.01 back to 6.3(4)? If so, what are the procedures to follow and also to go back from ASDM to PDM?Steffen
Hi, I have an ISDN backup problem. Seems to me that everything is working with the ISDN backup dialer when it comes to the physical connection. When my GRE tunnel (using GRE tunnel due to other cirumstances which I will not go into now) goes down due...
Hi,I have a client has a Cisco 2600 router configured with ISDN callback for one of their users. On their last bill from the telco they saw that during the callback session, another 0,04 Norwegian kroner was charged about every 30 sec. during the cal...
Hi,and thanx for replying!We are using pre-shared keys. ISAKMP, AH and ESP are enabled on the PIX. It should be the same on the other side, but I would have to check that on the remote-site Sonicwall. Have to ask the person in charge of that firewall...
Hi,and thanx for the reply. I will try it out. Have to in any case, as this one situation that is starting to be very common in todays VPN environment. Especially for all these consultants who have to hook up to their business clients who use all sor...
No worries!I found the downgrade guide after going through Cisco.com a bit more.For anyone who would like to know, here is where it's at:http://www.cisco.com/en/US/partner/products/sw/secursw/ps2120/products_upgrade_guides09186a0080369ee2.html#wp1810...
Hi to all who were kind enough to reply,the problem was fixed last week. There was something wrong with the ISDN connections on the other end. It all seemed to work fine, as I saw the dialer on the other side getting the connection, but it newer rout...
RickThe flapping I seem to have solved with using another cable. I don't get the flapping messages on the LAYER2 anymore.As for the switch type, I have looked it up and it's the correct one for my country -> Norway.The new debug shows this after doin...
