Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a 3945 router with two interfaces connected to my firewall, one to the management interface and another to my dmz. I'm running eigrp between all my network devices. The problem I'm running into is when I try to ssh to the management inter...
Any idea why rpr is the only available redundancey mode option available to me. I'm running a 4507R+E with twin SUP7-E's. Any help would be greatly appreciated.Abreviated show verCisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software...
Once I read through the information on the link you provided I realized I had some more config work to do. I changed the aaa authentication login statement, removed the tacacs servers from the global config and changed the console and vty ports to ...
This is what I currently have configured on the router and it still isn't working. It's a bit different from what you have above. This is that new 15.x series IOS where they are deprecating the tacacs-server commands...aaa new-model!aaa group server...
This appears to have fixed some issues and introduced others. NTP to the management interface is now working, it wasn't before, I can ssh to the management interface without nat'ing, however, when ssh'ing I'm having to use the local account as the r...
Also, I guess I should have put in my first post, 192.168.30.0/24 is my vlan 400 net and 192.168.0.0/24 is my vlan 998 (management) net.Hopefully you can see the drawing and it doesn't confuse matters more than it helps. The edge router, firewall an...
Apparently I'm not very good at searching the internet, I looked for just such a document to no avail. What a convoluted evolution to get licensing installed and activated..yay Cisco. Anyway, it's now booting correclty to entservices and sso is en...
