Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am currently setting up a couple C3560CG-8PC-S (Version 12.2(55)EX3) as conference room switches that can be passed out by the helpdesk. The location has mostly C3560-48 (Version 12.2(44)SE5). What I did so far is configure CISP for both switches ...
Hello again.I'm now trying to match on Directory Attributes returned by one of my Radius Identity Servers in my 'Authorization Policy'.The log comes back with this:Evaluating Service Selection Policy15004 Matched rule15012 Selected Access Service -...
Hi,I'm getting the error 'No rule was matched'.The authentication itself passes; the 'Radius Identity Servers' are sending back the accept.Tcpdump shows that the ACS is not asking the AD as defined in the compound condition.What am I missing?Any help...
I have 2 spokes that get NATed onto the same public IP address. The spokes both get their external IP from the same dhcp pool. Both spokes have separate configs and internal IP ranges and work fine on their own. #1 works fine, but if #2 is turned on ...
Hi Tarik,Thanks for the reply. The entire CISP part works; I do send the av-pair device-traffic-class=switch and the port configures as a trunk as expected and I can reach the supplicant switch.My Problem starts as soon as I configure 'mab' or 'dot1x...
Just remembered this and figured I still owe an answer.I had an identical variables 'VLAN' defined under System Administration > Configuration > Dictionaries > Identity >Internal Users and Internal HostsThis caused the CSV Import to fail; changing th...
