Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Im working with encrypted calls between endpoints and from endpoints to TPS. When trying to establish an encrypted call from CTS 3010 (registered in CUCM) to TPS, the call fail.Call Path: CTS --> CUCM --> VCS --> TPSSoftware Versions:CTS 3010 ...
Hi,This is my first post here and I would like to know your thoughts about the problem below:Scenario: VCS running 7.1 with B2BUA and a SIP connection using TLS. Microsoft Lync 2010 (one FEP), no FindMe users, just static route.TLS SIP connection is ...
Hi Shikhar,Does this means that Outbound IVR consumes licensed Inbound IVR ports?In my deployment, when an IVR Progressive campaign is enabled, the number of dedicated ports configured decrease the same amount of ports in the available inbound IVR po...
Hi Patrick,Thanks for your help.After several delays and upgrades, the encrypted call is working now. The issue appears to be a limitation on the TPS software to handle custom certificates with a 2046 byte key, according to this release notes:http://...
Hi Patrick,Yes. In fact, encrypted calls between CTS and endpoints registered in VCS successfully complete. Secure mode was enabled in CTS using this guide:http://www.cisco.com/en/US/docs/telepresence/security_solutions/1_8/CTSS.htmlEncrypted SIP tru...
