Mahesh, Sounds like a java issue then, check the java version on the work and non working hosts and consider bypassing the Java and check if it works Regards
Hi, Try re installing the app or running that from a web browser (https://[asa_ip]), does it happen from several hosts? what Java version you are running on the host?Just to be sure, check via the CLI the status of the flash just in case with the sho...
Matthew, Each IP you use on a dynamic supports around 65k connections, so if you feel that in fact you have that many connections (globally, not only the SNMP server) behind the ASA, then consider a pool. Try checking the show xlate count to have a b...
Hi James, that is in fact the way to do it. You will have to mirror what you have on your main ISP connection to the backup (NAT's and ACL's and external access to the ASA if needed). Things like an Exchange might be complicated because you will have...
Q1) Yes, both IP and MAC address will be pass to the new active unit so anyone on the network except the switch will notice the failover eventQ2) Yes, the Primary (now standby) will use not only those IP addresses but the MAC addresses the secondary ...
