Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HowdyWe added Site02 for redundancy and DR. Also added new SAN and ESX hosts.The CPU on device Site01Server01 is not very happy when files are being transferred between the sites. Since the setup is the same at both sites, why is the problem only at ...
G'day The (sm-es2-16p) has interface Gi0/1 connected through the backplane to the Router interface Gi1/0.To get your routing working you should remove the physical cable and apply the below configuration to the router.Hope it helpsconf tdefault inter...
Hi QamrulLLDs are part of your IP, so most will not share. Cisco has some good templates for partners, especially for VoIP deployments.If you are doing your own include some of the following topics with specific relevance to your design - Technology...
Hi ColinThis is an indication of WCCP communication loss between the router and the WAE.Can you post your WCCP config for the router and WAE.To what interface does 10.2.100.250 belong? Do you have a loopback on the router?CheersPhillip
Thanks for the heads up.Memory is behaving, still have plenty to spare.The high CPU just went away, tested with high traffic loads and CPU just stayed at 6%.Looks like it just had a cpl of off days?
