Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I get the following error whne enabling 802.11a network on a AIR-WLC2106-K9. Country is set to ID (Indonesia)>config 802.11a enable network802.11a network not supported for this Country CodeYet, on a AIR-CT2504-K9, set to same country code there ...
The SRE-700 comes configured with 2x2M DRAM. I have an SRE-700 with 2x4M DRAM installed but it gives alarms about unsupported configuration as 8M although it is working and optimising traffic. I want to remove one of the 4M module but not sure if the...
Ok, Nicolas, thanks for your response. In that case I guess the right thing would be to order 2x2M DRAM to replace the 2x4M for a supported configuration.Regards,Andrew
Hi Nicolas, Yes, this is a SRE-700, not a SRE-900. The reason it had 8M is because it was ordered with additional 4M memory (don't know why or how it was allowed to be done when the SRE-700 only supported 4M). I can just remove one 4M and try but I ...
