802.11a network not supported for this Country Code

[achong]

Hi, I get the following error whne enabling 802.11a network on a AIR-WLC2106-K9. Country is set to ID (Indonesia)

>config 802.11a enable network

802.11a network not supported for this Country Code

Yet, on a AIR-CT2504-K9, set to same country code there is no problem.

Is this a WLC model or version issue? WLC2106 is on version 6.0.199.4 while the CT2504 is 7.0.220.0

Andrew

[Scott Fella]

Well is it the only country code selected? Also you might as well upgrade the 2106 to 7.0.x and move off the 6.0.x. Since your 2604 is at that code you might as well upgrade the 2106 and see. I'm guessing that you have the same APs and the APs are for that country.

Sent from Cisco Technical Support iPhone App

[achong]

I have upgraded the C2106 to 7.0.240.0 code and I can now enable the 802.11a network.

Thanks.

[Scott Fella]

No problem... I figured you should keep the code similar and since it worked on the 2504, that would eliminate the code on the 2106.

Sent from Cisco Technical Support iPhone App